Interior gateways connect LANs of one
organization, whereas exterior gateways connect the organization to the outside
world.
In token Ring , hub is called Multi station
Access Unit(MAU).
In a Ethernet network, between any two points
on the network, there can be no more than five network segments or four
repeaters, and of those five segments only three of segments can be populated.
In a baseband transmission, the entire
bandwidth of the cable is consumed by a single signal. In broadband
transmission, signals are sent on multiple frequencies, allowing multiple
signals to be sent simultaneously.
ICMP is Internet Control Message Protocol, a
network layer protocol of the TCP/IP suite used by hosts and gateways to send
notification of datagram problems back to the sender. It uses the echo test /
reply to test whether a destination is reachable and responding. It also
handles both control and error messages.
Hybrid devices that combine the features of
both bridges and routers.
Frame relay is a packet switching technology.
It will operate in the data link layer.
External Data Representation is a method of
encoding data within an RPC message, used to ensure that the data is not
system-dependent.
Every line has an upper limit and a lower
limit on the frequency of signals it can carry. This limited range is called
the bandwidth.
DNS uses UDP for communication between
servers. It is a better choice than TCP because
range of IP addresses in the classes of
internet addresses are as under...
Class A 0.0.0.0 - 127.255.255.255
Class B 128.0.0.0 - 191.255.255.255
Class C 192.0.0.0 - 223.255.255.255
Class D 224.0.0.0 - 239.255.255.255
Class E 240.0.0.0 - 247.255.255.255
Class A 0.0.0.0 - 127.255.255.255
Class B 128.0.0.0 - 191.255.255.255
Class C 192.0.0.0 - 223.255.255.255
Class D 224.0.0.0 - 239.255.255.255
Class E 240.0.0.0 - 247.255.255.255
BUS topology:
In this each computer is directly connected to primary network cable in a single line.
Advantages:
Inexpensive, easy to install, simple to understand, easy to extend.
STAR topology:
In this all computers are connected using a central hub.
Advantages:
Can be inexpensive, easy to install and reconfigure and easy to trouble shoot physical problems.
RING topology:
In this all computers are connected in loop.
Advantages:
All computers have equal access to network media, installation can be simple, and signal does not degrade as much as in other topologies because each computer regenerates it.
In this each computer is directly connected to primary network cable in a single line.
Advantages:
Inexpensive, easy to install, simple to understand, easy to extend.
STAR topology:
In this all computers are connected using a central hub.
Advantages:
Can be inexpensive, easy to install and reconfigure and easy to trouble shoot physical problems.
RING topology:
In this all computers are connected in loop.
Advantages:
All computers have equal access to network media, installation can be simple, and signal does not degrade as much as in other topologies because each computer regenerates it.
Bit rate is the number of bits transmitted
during one second whereas baud rate refers to the number of signal units per
second that are required to represent those bits.
baud rate = bit rate / N
where N is no-of-bits represented by each signal shift.
baud rate = bit rate / N
where N is no-of-bits represented by each signal shift.
Anonymous FTP enables users to connect to a
host without using a valid login and password. Usually, anonymous FTP uses a
login called anonymous or guest, with the password usually requesting the
user's ID for tracking purposes only. Anonymous FTP is used to enable a large
number of users to access files on the host without having to go to the trouble
of setting up logins for them all. Anonymous FTP systems usually have strict
controls over the areas an anonymous user can access.
An unspecified passive open has the server
waiting for a connection request from a client. A fully specified passive open
has the server waiting for a connection from a specific client.
Along any transmission path from a given
source to a given destination, a group of virtual circuits can be grouped
together into what is called path.
A TCB is a complex data structure that
contains a considerable amount of information about each connection.
A resource record is an entry in a name
server's database. There are several types of resource records used, including
name-to-address resolution information. Resource records are maintained as
ASCII files.
A pseudo tty or false terminal enables
external machines to connect through Telnet or rlogin. Without a pseudo tty, no
connection can take place.
A protocol that assures accurate local
timekeeping with reference to radio and atomic clocks located on the Internet.
This protocol is capable of synchronizing distributed clocks within
milliseconds over long time periods. It is defined in STD 12, RFC 1119.
No comments:
Post a Comment